Avscash Trust, T/as Cutlist.biz Cabinet Making
ABN: 61 427 657 214
QBSA: 1176277
Address: 27-33 Bunya Crt, Cedar Vale, Qld, 4285
Ph: 07 5543 2949
Fax: 07 5543 2983
Mob: 0422 443 170

Cutlist.biz Cabinet Making. Custom Designed Cabinetry 

Facebook Twitter Gplus YouTube Google Maps E-mail RSS
Home Kitchens House Fitout, Paddington Kitchen
formats

House Fitout, Paddington Kitchen

Published on November 10, 2008 by in Kitchens

The kitchen in this house fitout was made from rotary cut hoop pine plywood, finished in satin 2pac with exposed plywood edges, Laminex eggplant with 1mm pvc edges, stainless steel benches and splash backs with stainless steel shelves fitted to them. All tandembox softclose drawers and blumotion to doors and also a wire basket pull out pantry system with softclose. All handles were supplied by Madinoz.

The sink section of the kitchen is suspended off the wall without any kickboards. The pantry section has been designed to look like a large block and the island to look as if its sitting on a block as well.

At the ceiling, you will notice blades coming down from the ceiling all the way along, the frame work for these had to be made before being clad, allowing me to fit the blades into the ceiling, then the chippies were able to clad the exposed framework. We then used these ceiling blades to suspend the open shelves from them. 

The open shelf above the island had to be built on site. It consisted of 19 components. I had to fit one half of one gable to the ceiling blades first, then fit the actual shelves into the slots. The other half of the side could then be put into place. This allowed me to screw them to the blades. After this was done, I could then fit the other side of the gables around the shelves and then put in some exposed fittings at the top to the blades. A complete work of art.

 
Tags:
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
  comments